Description
Advance HC400 Heavy Duty Marine Gearbox – Product Overview
The NEW Advance HC400 Heavy Duty Marine Gearbox 1.50:1 Reduction is a robust marine hydraulic gearbox engineered for commercial propulsion systems where drivetrain strength, accurate ratio selection, and proper installation configuration are required.
Built for demanding vessel applications, the Advance HC400 is installed between the marine engine and propeller shaft system to reduce engine speed and transfer power through the drivetrain. This model is configured with a 1.50:1 reduction ratio, making it suitable for commercial propulsion setups requiring lower reduction and direct drivetrain matching within the HC400 series range.
For buyers searching for an Advance HC400 marine gearbox, Advance HC400 1.50:1 gearbox, heavy duty marine hydraulic gearbox, or commercial marine gearbox replacement, this unit provides a fitment-focused solution for marine technicians, vessel owners, shipyards, fleet operators, and commercial repower specialists.
Built for Commercial Marine Applications
The Advance HC400 Heavy Duty Marine Gearbox is designed for commercial marine propulsion environments where the drivetrain must support dependable operation, correct engine matching, and properly selected reduction.
Commercial marine applications may include:
- Workboats
- Fishing vessels
- Passenger vessels
- Utility vessels
- Landing craft
- Commercial service boats
- Fleet repower projects
- New marine propulsion installations
Its hydraulic transmission design supports controlled engagement and reliable power transfer when matched with the correct engine, adaptor plate, drive plate, control system, shafting, propeller, cooling arrangement, and vessel duty cycle.
1.50:1 Reduction Ratio Configuration
This product is specified with a 1.50:1 reduction ratio, one of the available HC400 ratio options.
A marine gearbox reduction ratio determines how engine speed is reduced before reaching the propeller shaft. The correct ratio must be selected based on engine output, propeller size, vessel displacement, hull type, load profile, operating speed, shafting arrangement, and commercial duty requirements.
The 1.50:1 ratio is suitable for applications where the propulsion system requires lower reduction within the HC400 range while maintaining proper engine-to-propeller matching.
Available Advance HC400 ratio options include:
| Ratio Option | Rating |
|---|---|
| 1.50:1 | 0.45 hp/RPM |
| 1.77:1 | 0.45 hp/RPM |
| 2.04:1 | 0.45 hp/RPM |
| 2.50:1 | 0.45 hp/RPM |
| 3.00:1 | 0.45 hp/RPM |
| 3.25:1 | 0.45 hp/RPM |
| 3.38:1 | 0.45 hp/RPM |
| 3.42:1 | 0.45 hp/RPM |
| 4.06:1 | 0.38 hp/RPM |
| 4.61:1 | 0.25 hp/RPM |
| 4.94:1 | 0.25 hp/RPM |
This page is specifically for the 1.50:1 reduction configuration with a 0.45 hp/RPM rating.
Heavy Duty Hydraulic Marine Transmission
The Advance HC400 is a heavy duty marine hydraulic gearbox designed to transfer engine power through the marine drivetrain while supporting controlled clutch engagement and dependable transmission operation.
Hydraulic marine gearboxes are commonly used in commercial vessels because they provide practical drivetrain integration when properly selected and installed. The HC400 is suitable for heavy-duty marine propulsion systems where gearbox ratio, input speed, adaptor plate size, drive plate size, control type, cooling requirements, and shaft alignment must all be confirmed before installation.
Key drivetrain considerations include:
- Engine output compatibility
- Gear ratio selection
- Maximum input speed
- Adaptor plate size
- Drive plate size
- Control type
- Shafting and propeller requirements
- Cooling and lubrication setup
- Mounting arrangement
- Vessel duty cycle and operating profile
The gearbox should always be matched to the engine, vessel, propeller, and duty cycle by a qualified marine technician or propulsion specialist.
Maximum Input Speed of 1800 RPM
The Advance HC400 marine gearbox is rated with a maximum input speed of 1800 RPM.
This specification is important when matching the gearbox to a marine engine. The selected engine must operate within the gearbox’s approved input speed range, and the final drivetrain setup should be verified according to the vessel’s propulsion requirements.
Correct matching of input speed, reduction ratio, engine power, propeller load, and commercial duty cycle helps support dependable gearbox operation and proper propulsion system integration.
SAE Adaptor Plate Options
The NEW Advance HC400 Heavy Duty Marine Gearbox 1.50:1 Reduction is available with SAE adaptor plate options to support different engine installation requirements.
Adaptor plate options include:
- SAE1
- SAE0
The correct adaptor plate should be selected based on the engine flywheel housing, mounting configuration, and marine installation requirements. Choosing the correct adaptor plate is essential for accurate engine-to-gearbox alignment and secure mechanical integration.
Mechanical and Electronic Control Options
The Advance HC400 1.50:1 marine gearbox can be configured with different control options depending on the vessel’s control system.
Available control options include:
- Mechanical control
- Electronic control
Mechanical control setups are commonly used in traditional marine installations with cable or linkage-based control systems. Electronic control options may be suitable for vessels using electronic throttle and shift architecture.
Buyers should confirm the required control configuration before purchase to ensure compatibility with the vessel’s helm controls, control cables, electronic interface, and overall propulsion setup.
Drive Plate Options
The HC400 is available with multiple drive plate options to support different engine and gearbox connection requirements.
Available drive plate sizes include:
- 14” drive plate
- 16” drive plate
- 18” drive plate
Drive plate selection should be confirmed based on engine specification, flywheel configuration, torsional requirements, torque rating, and gearbox compatibility. Correct drive plate matching helps support smooth power transfer between the engine and gearbox.
Gearbox Oil Cooler Option
The Advance HC400 Heavy Duty Marine Gearbox offers an option for a gearbox oil cooler.
A gearbox oil cooler may be required depending on operating conditions, engine output, transmission load, ambient conditions, vessel duty cycle, and the cooling arrangement of the installation. Commercial marine applications often require careful temperature management to support stable gearbox operation under load.
Cooling requirements should be confirmed before installation based on the propulsion system and manufacturer recommendations.
Commercial Repower and Replacement Applications
The NEW Advance HC400 Heavy Duty Marine Gearbox 1.50:1 Reduction is suitable for commercial repower projects, gearbox replacement, and new marine propulsion installations requiring a heavy-duty hydraulic transmission.
During a repower or replacement project, the gearbox must be matched carefully to the vessel’s engine, propeller, shafting, mounting arrangement, cooling system, control type, and duty cycle.
Buyers should confirm:
- Advance HC400 gearbox requirement
- 1.50:1 reduction ratio
- 0.45 hp/RPM rating requirement
- SAE1 or SAE0 adaptor plate
- Mechanical or electronic control
- 14”, 16”, or 18” drive plate
- Oil cooler requirement
- Engine output and input speed
- Shafting and propeller compatibility
- Vessel duty cycle and commercial application
Correct configuration helps support dependable marine propulsion system integration.
Installation and Compatibility Considerations
The Advance HC400 marine gearbox should be installed according to manufacturer specifications and matched carefully with the vessel’s propulsion system.
Important installation considerations include engine model, adaptor plate type, drive plate size, gearbox ratio, control configuration, mounting arrangement, shaft alignment, oil cooler requirement, lubrication, foundation support, coupling setup, and service access.
This gearbox should be installed by qualified marine technicians familiar with commercial marine propulsion systems. Proper installation helps reduce the risk of alignment issues, control mismatch, overheating, drivetrain vibration, premature wear, or incorrect gearbox selection.
Worldwide Marine Equipment Supply
The NEW Advance HC400 Heavy Duty Marine Gearbox 1.50:1 Reduction is suitable for customers requiring professional commercial marine gearbox supply.
With experience shipping marine engines, transmissions, gearboxes, propulsion components, and spare parts worldwide, this gearbox can support vessel owners, shipyards, marine technicians, fleet operators, and repower specialists requiring dependable commercial marine drivetrain solutions.
Technical Specifications
| Specification | Details |
| Product Name | NEW Advance HC400 Heavy Duty Marine Gearbox 1.50:1 Reduction |
| Manufacturer | Advance |
| Model | HC400 |
| Product Type | Heavy Duty Marine Hydraulic Gearbox |
| Primary Application | Commercial Marine Propulsion |
| Selected Ratio | 1.50:1 |
| Selected Ratio Rating | 0.45 hp/RPM |
| Available Ratio Options | 1.50:1, 1.77:1, 2.04:1, 2.50:1, 3.00:1, 3.25:1, 3.38:1, 3.42:1, 4.06:1, 4.61:1, 4.94:1 |
| Rating Options | 0.45 hp/RPM, 0.38 hp/RPM, 0.25 hp/RPM depending on ratio |
| Maximum Input Speed | 1800 RPM |
| Adaptor Plate Options | SAE1, SAE0 |
| Control Options | Mechanical, Electronic |
| Drive Plate Options | 14”, 16”, 18” |
| Gearbox Oil Cooler | Optional |
| Weight | 820 kg |
| Drop Centre | 264 mm |
| Dimensions | 843 × 950 × 890 mm |
| Suitable Use | Commercial vessels, workboats, repower projects, new marine installations |
| Component Type | Heavy-duty commercial marine transmission |
Key Product Details
The NEW Advance HC400 Heavy Duty Marine Gearbox 1.50:1 Reduction is a configurable commercial marine hydraulic gearbox designed for dependable drivetrain applications.
Key details include:
- Advance HC400 heavy-duty marine gearbox
- 1.50:1 reduction ratio
- 0.45 hp/RPM rating for the 1.50:1 option
- 1800 RPM maximum input speed
- SAE1 and SAE0 adaptor plate options
- Mechanical or electronic control options
- 14”, 16”, and 18” drive plate options
- Optional gearbox oil cooler
- 820 kg gearbox weight
- 264 mm drop centre
- 843 × 950 × 890 mm dimensions
- Designed for commercial marine applications
This gearbox should be selected only when the engine, vessel, control system, ratio, mounting arrangement, and drivetrain requirements match the HC400 specification.
Frequently Asked Questions
What is the Advance HC400 marine gearbox used for?
The Advance HC400 marine gearbox is used in commercial marine propulsion systems to transfer engine power through a heavy-duty hydraulic transmission to the propeller shaft system.
What reduction ratio is this gearbox configured with?
This product is specified with a 1.50:1 reduction ratio.
What is the rating for the 1.50:1 ratio?
The 1.50:1 ratio option is listed with a 0.45 hp/RPM rating.
What ratio options are available for the Advance HC400?
Available ratio options include 1.50:1, 1.77:1, 2.04:1, 2.50:1, 3.00:1, 3.25:1, 3.38:1, 3.42:1, 4.06:1, 4.61:1, and 4.94:1.
What is the maximum input speed?
The maximum input speed is 1800 RPM.
What adaptor plate options are available?
Adaptor plate options include SAE1 and SAE0.
What control options are available?
The gearbox can be configured with mechanical or electronic control options.
What drive plate sizes are available?
Drive plate options include 14”, 16”, and 18”.
Is a gearbox oil cooler available?
Yes. A gearbox oil cooler is available as an option.
What is the weight of the gearbox?
The gearbox weighs 820 kg.
What is the drop centre?
The drop centre is 264 mm.
What are the dimensions?
The dimensions are 843 × 950 × 890 mm.
Should compatibility be verified before purchase?
Yes. Buyers should verify engine compatibility, ratio requirement, adaptor plate type, drive plate size, control option, oil cooler requirement, shaft alignment, mounting arrangement, and vessel duty cycle before purchase.
Reviews
There are no reviews yet.